Rubber Mounted Points are made of WA+synthetic rubber. They are used for finishing, polishing and deburring all kinds of ferrous and non-ferrous metals, for manufacturing and repairing molds, stampings and tools. They are of excellent flexible, wear resistance and excellent polishing ability.
||High elasticity, fast grinding, not easy to burn the workpiece, can quickly achieve fine polishing.
||Used for finishing, polishing and deburring all kinds of ferrous and non-ferrous metals, for manufacturing and repairing molds, stampings and tools.
1:The rotationl speed should be higher than the general requirements as much as possible, and the line speed should not be lower than 10~20m/s.
2:During the grinding process, Do not hit the workpiece. The Mounted Points should be lightly attached to the surface of the workpiece. Especially when using small size and sharp grinding heads, should hold the grinding machine firmly with both hands. Do not use too much force,it will cause the grinding head to burst and the shank to break.
3:It will be better for using.if the grinding head are trimmed on a diamond file before use.
4:In the process of use, if found that the iron filings on the surface of grinding head block air holes, The grinding mounted points should be trimmed with a diamond file and then to use