CERATON Ceramic Fibre Stones made from ceramic fibers bonded in thermosetting resin,exhibits supperior strength compared by normal abrasive stones,Long life and no clogging is stuitable for all kinds of equipments like ultrasonic machines,high speed rotaries,Air Lappers&Air Grinders and also good by hand polsihing.Ceraton super stones provides more powerful cutting efficiency,higher hardnees,longer using life.Widely used for removing EDM grains and machining marks, thanks to its flexibility, Fiber Stones are ideal choice for polishing deep and narrow rib, slots, grooves and engravings which are difficult to polish using conventional abrasive stones. When used with Ultrasonic polishing machines and air lapper, fibre stones help in very fast stock removal and cuts only through its tip and is normally held at 5~45 degrees to the surface to be polished.
|Origin||Made in Japan|
|Function||Polishing Gringding for mold|
Both the Stick and the Rod types can be used to polish with the tip or the sides of the tools.
Ideal for polishing after EDM and wire cut processing.
Also ideal for polishing ribs and deburring edges and corners.
Can be formed into desired shapes, such as a thinner tips.
Can be used more efficiently when attached to tools (electric. air, or ultrasonic).
Ceramic fiber stone can be in all sorts of different material on the steel grinding process. The most used in general difficult in grinding process, such as narrow ditch wall, holes, scratches, ribs and small fine place. Especially for the discharge carbon layer after processing the rapid removal and polishing the effect is much better.
#180,#250 --To remove the rough machining surface or hard EDM scale of tooling and die steels
#320,#400 --General lapping of finer surface scratch line of mold,die steels.
#700,#1000 ,#1200--Fine polishing grinding finish surface