XEBEC CNC Deburring Brushes

XEBEC CNC Deburring Brushes

XEBEC Brush uses unique abrasive ceramic fiber material instead of abrasive grain.
Each bristle consists of 1,000 ceramic fibers that work as cutting edges.
Overwhelming grinding power, Consistent cutting performance, No deformation.
Enables CNC deburring immediately after milling and machining operations inside the same machine tool.

XEBEC Brush

XEBEC Brush Crosshole Extra-Large

Ideal for deburring, polishing, and removing cutter marks on inner diameters

 XEBEC Brush  Surface

Features

-After cutting process, this product removes burrs with the burr root thickness of 0.2 mm or less. It is also ideal for cutter mark removal and surface polishing.

-The tip of the bristle remove burrs and finish the edges.

-CNC deburring and cutter mark removal can be achieved by installing onto a machining center, robot, drilling machine, or other machining equipment(Can be installed on machining equipment with a collet chuck, milling chuck, drill chuck, or similar means.)

-The original brush material (ceramic fibers)enables consistent deburring and polishing capability without changes to the cutting performance or brush shape.The abrasive material is ceramic fiber that contains no abrasive grains at all.

-The product can be used for both dry and wet machining.

XEBEC Brush Crosshole

Features

-Centrifugal force generated by rotation causes the brush to expand and remove fine burrs from the crosshole inside the cylinder.

-It polishes and removes black scale from the inside surface of the cylinder, and removes cutting particles and foreign substances from the hole bottom surface.

-The abrasive material is ceramic fiber that contains no abrasive grains at all.

-The brush tip generates grinding power. The tip of the bristle removes burrs and finishes the edges.

-Install onto a machining center, robot, or other processing equipment to remove burrs and cutter marks.

-The original brush material (ceramic fibers) enables consistent deburring and polishing capability without changes to the cutting performance or brush shape.

XEBEC Brush Crosshole

Are you looking XEBEC Brush ,Please send messages us

Regresar al blog

Deja un comentario