xebec ceramic fiber abrasive stone G series

What is the xebec ceramic fiber abrasive stone G series?

Xebec fiber stone is ceramic fiber filament that maintains excellent grinding power.Ideal for polishing and detailed finishing of dies and molds, and other workpieces that are complex in shapes.
No breaking, No cracking, No chipping.
There are 2 types available: Stick type and Rod type.

Selection

Product Taget Workpiece Features 
Stick type G series Materials up to HRC57
(e.g. plastic mold steel, carbon steel)

Ideal for mold polishing & deburring

Only use the tip

Suitable for removing EDM scales

Easy to form the tip

Rod type G series Materials up to HRC57
(e.g. plastic mold steel, carbon steel)

Ideal for mold polishing & deburring

Only use the tip

Suitable for removing EDM scales

Easy to form the tip

 Xebec ceramic fiber stone G series sizes/grits/codes

 Grits
  #180  
  #220  
  #250  
  #400  
  #600  
  #800  
  #1000  
  #1200  
Sizes
(colors)
Brown
Coffee
Orange
Yellow
Gray
Blue
White
Red
1*4*100
GG-1004M
GD-1004M
GA-1004M
GO-1004M
GP-1004M
GB-1004M
GW-1004M
GR-1004M
1*6*100
GG-1006M
GD-1006M
GA-1006M
GO-1006M
GP-1006M
GB-1006M
GW-1006M
GR-1006M
1*10*100
GG-1010M
GD-1010M
GA-1010M
GO-1010M
GP-1010M
GB-1010M
GW-1010M
GR-1010M
Φ3*100
GG-30M
GD-30M
GA-30M
GO-30M
GP-30M
GB-30M
GW-30M
GR-30M

Features 

Stick type

High grinding power on the tip

Efficient polishing performance and strength

xebec fiber stone G series-2

Rod type

Cutting edges are exposed over the entire surface; both the tip and sides has high grinding power

Can be used with high rotational speed without splitting the tip

How to Use

Stick type

Press the tip against the surface at an angle of approximately 45 degrees.

xebec fiber stone G series-45 degrees

It can be used by directly holding in your hand, or can be used with the optional stick holder to improve work efficiency.

Use with a vibrating tool (electric, ultrasonic and pneumatic type) improves efficiency.

The use of metal polish liquid is recommented to prevent clogging and improve polishing efficiency.

xebec fiber stone G series-45 degrees-2

Rod type

For the rod type, the entire surface (tip and sides) has grinding power. To improve work efficiency, make contact the tip with the polishing surface at angle of approximately 45 degrees.

It can be used by directly holding in your hand, or can be used with the optional stick holder to improve work efficiency.

Use with a rotating tool (electric and pneumatic types) improves work efficiency.

The use of mental polish liquid is recommended to prevent clogging and improve polishing efficiency.

Precautions

Before using a vibration tool or a hand grinder, carefully read the usage precautions and respective manuals. When using the rod type (Φ2.34mm, Φ3mm) with a hand grinder, cut off the stone less than 50mm in length, and use at less than the maximum rotation speed of 30000min-1.

Ultra Polisher

Check the appropriate output. The tool may break or generate heat when the output is too large.

Check the appropriate length. If the length is inappropriate, the tool may not vibrate, or cause heat generation due concentrated output.

Clamp the tool securely. Poor clamping may concentrate output, resulting in excessive heat generation. Carefully read the instruction manual of an ultrasonic polisher because polishing perfomance differes depending clamping method.

Maintenance

Truing

If the tip is worn out, form it with diamond disc blade or grinder. You can also customize the shape depending on the application or workpiece shape. For the rod type, you can use a rotary tool to precisely form the tip.

xebec fiber stone G series truing

Opreator Safety Measures

For Protective Equipment

Always wear protective goggles, gloves and masks when operating the tool. Wear long sleeves, tight cuff, and clothing to minimize skin exposure.

Beware of Gringding Powder

Grinding powder and burrs may scatter within an area around the work as the brush revolves; please stay clear of this area.

Be Aware of Your Surroundings

The area around your work is hazardous in case flying pieces of fiber rods from the tools and grinding powder may scatter, enclose your working area to prevent other people entering, or have the people surrounding your work area protective equipment as well.

!Warning!

By not following the above safety measures, you are vulnerable to the following risks:

A tool or a part of a tool may crack, drop off, distort or break.
Broken pieces of a tool or grinding dust may stick into your skin and eyes, causing irritation and/or blindness.
Dust generated by machining process may cause allergic reactions.

Voltar para o blog

Deixe um comentário